
Thermoshield Wall Coats can be applied to both interior and exterior walls. When the flexible, water-based coating dries, it creates a seamless...
645,00$
Thermoshield Wall Coats can be applied to both interior and exterior walls. When the flexible, water-based coating dries, it creates a seamless membrane that works as both an insulator and waterproofer. The Thermoshield formula is non-toxic, so it is completely environmentally friendly and safe to use anywhere.
The wall coats are made from an acrylic resin and filled with vacuumed ceramic microspheres. This compound is an efficient insulator that helps keep interior temperatures consistent while also protecting the structure from exterior conditions.
The protection offered by Thermoshield Wall Coats goes beyond climate control. The seamless membrane does not absorb dirt or chemicals, it is fire resistant and it reduces noise pollution.
The coating can be applied easily with a sprayer or roller. It comes in a variety of tints and, when dry, it creates an attractive matte finish that is easy to clean.
Thermoshield Wall Coats have “variable permeability.” This is an especially important trait for exterior wall coats. Variable permeability means that the membrane becomes water tight when saturated, but “breathes away” trapped water as it dries. This trait is also helpful for reducing condensation build-up.
Statistics | Reflectance 89%, Emittance 94%, Conductance 0.06 W/mK. |
Standard insulation products do not stop heat from entering or leaving a structure, they simply slow down the process.
Thermoshield actually keeps the heat out. Solar gain (heat from sunlight) only occurs when the heat is absorbed by the surface.
Wall Coats reflect most of the sunlight, emitting it back into the air instead of absorbing it.
The Thermoshield compound has a very low conductance value, so the small amount of radiant heat that
is not reflected away is not passed into the building.
Tip Orifice | 0.78mm (0.031 inches) |
Atomizing Pressure | 2200 - 2500 psi |
Fan Spread | 60 Degrees |
Pump | Minimum one gallon per minute at 2500 psi |
Filter | Remove filters and screens |
Weight per gallon | 4.5 kg (10 lbs) |
Five gallon pails | 22.7 kg (50 lbs) |
55 gallon drums | 272 kg (600 lbs) |
This product comes with a 10 year warranty. The sole remedy for goods not in conformance with any warranty is replacement of the product. Thermoshield shall not be liable for any other damages, including, but not limited to, labor expenses.